---
title: 'Hoover® Power Scrub Elite Carpet Cleaner - Assembly and Use'
source: 'https://youtube.com/watch?v=_3gW_DL8baM'
video_id: '_3gW_DL8baM'
date: 2026-09-15
duration_sec: 124
channel: 'Hoover'
---

# Hoover® Power Scrub Elite Carpet Cleaner - Assembly and Use

> Source: [Hoover® Power Scrub Elite Carpet Cleaner - Assembly and Use](https://youtube.com/watch?v=_3gW_DL8baM)

## Summary

This instructional video provides a step-by-step guide to assembling and operating the Hoover Power Scrub Elite carpet cleaner. It covers initial setup, cleaning techniques for carpets, upholstery, and stairs, and essential maintenance for storage.

### Key Points

- **Assembly** [00:00] — Push the handle onto the base, insert both screws, and secure with a screwdriver. Tilt the clean water and solution tank into place.
- **Preparation** [00:14] — Move furniture out of the way and vacuum the area to remove debris before deep cleaning.
- **Filling Tanks** [00:14] — Remove the clean water tank, add warm water up to the fill line. Remove the solution tank cap and add Hoover solution up to the fill line. Secure caps and return tank to base.
- **Starting Cleaning** [00:31] — Choose cleaning mode, set wash rinse dial to wash, step to turn on, step on handle release and pull back to start cleaning.
- **Carpet Cleaning Technique** [00:43] — Move slowly forwards and backwards while squeezing the trigger to release water and solution. Release trigger and move over the same area to pick up dirty water. Use slower strokes than a vacuum, overlap strokes by at least one inch to prevent streaking, and never squeeze the trigger for more than four passes on a single section.
- **Rinsing** [01:11] — Set the wash rinse dial to rinse and repeat the process to remove excess solution. End with several dry strokes without squeezing the trigger until little water is picked up.
- **Emptying Dirty Water Tank** [01:24] — If the motor sound changes, the dirty water tank is full and needs to be emptied.
- **Upholstery and Stairs Cleaning** [01:39] — Set dial to wash, open hose connection port, insert hose and twist clockwise to secure. Open solution port door and push in connector. Slide tool onto hose, press trigger to release water, release trigger and scrub, then tip nozzle forward to pick up dirty water.
- **Storage** [01:53] — Always ensure both tanks are empty, rinsed, and dry before storage.

## Transcript

You can assemble your Power Scrub Elite in a few quick steps. First, push the handle onto the base, insert both screws and secure with a screwdriver. Then tilt the clean water and solution tank into
place. Before you deep clean, move any furniture out of the way and use your vacuum to remove any debris. Now press this latch and remove the clean water tank. Twist off the water cap and add warm water up to the fill line. Then remove the solution tank cap and add Hoover solution up to the fill
line. Secure both caps and return the tank to the base. Choose your cleaning mode and then set the wash rinse dial to wash. Step here to turn it on. Step on the handle release and pull back to start
cleaning. Slowly move forwards and backwards while squeezing the trigger to release clean water and solution. Now release the trigger and slowly move over the same area to pick up the dirty water. Carpet cleaners require slower strokes than a vacuum so try to remain slow and steady and aim to overlap strokes by at least one inch to prevent streaking Never squeeze the trigger for more than four passes on a single section to avoid over saturating your carpet Now set the
wash rinse dial to rinse and repeat the process over the same area to remove excess solution. Be sure to end with several dry strokes without squeezing the trigger until little water is picked up. If you notice the motor sound change,
Your carpet cleaner will stop picking up water because the dirty water tank is full and needs to be emptied. To clean upholstery and stairs, set the dial to wash, open the hose connection port and insert the hose, twist it clockwise to
secure, open the solution port door and firmly push in the connector. Slide your desired tool onto the hose then press the trigger to release water and solution. Release the trigger and scrub to clean, then tip the nozzle forward to
pick up the dirty water. When you're done cleaning, always make sure both tanks are empty, rinsed, and dry before storage.