---
title: 'My Breakout Strategy Setup Tutorial'
source: 'https://youtube.com/watch?v=RLM8vR-KPPI'
video_id: 'RLM8vR-KPPI'
date: 2026-11-15
duration_sec: 539
channel: 'The Moving Average'
---

# My Breakout Strategy Setup Tutorial

> Source: [My Breakout Strategy Setup Tutorial](https://youtube.com/watch?v=RLM8vR-KPPI)

## Summary

This video is a step-by-step tutorial on setting up an automated forex breakout trading strategy using TradingView and VexBinder. The creator demonstrates how to configure a consolidation breakout indicator on EUR/USD, set up alerts, and connect them to MetaTrader 5 for fully automated trade execution.

### Key Points

- **Strategy Overview** [00:02] — The strategy measures the overnight Tokyo range and enters a buy order on a breakout above that range. The creator reports a 10% profit from daily trade setups over the last month.
- **Indicator Setup** [00:27] — Use the 'Consolidation Breakout V3' indicator by NS TradeB on EUR/USD 5-minute chart. Adjust settings: custom range preset, 6-hour block from 1:00 AM to 7:00 AM (adjust for timezone), untick lines in style, stop-loss as 50% of range, take-profit at risk-to-reward 2, and enable EMA filter.
- **Automation Motivation** [01:51] — The creator automates because the trade entry at 7 AM conflicts with school drop-off, causing missed entries. Automation frees up time and ensures consistent execution.
- **Alert Setup** [02:30] — Create two separate alerts on TradingView (buy and sell) with webhook URLs. Use VexBinder to connect TradingView alerts to MetaTrader 5 for automatic trade entry.
- **VexBinder Configuration** [03:10] — Use the recommended virtual VPS (no physical VPS needed). Log into broker (e.g., Ryzen) via MetaTrader 5, set symbol to EUR/USD, and configure the EA with tokens from VexBinder.
- **Trade Parameters** [04:18] — Set trade size (e.g., 2 lots), stop-loss as ATR multiplier (e.g., 3x ATR), and take-profit in fixed pips (e.g., 15 pips). Enable 'shadow stop' to hide stop-loss from broker.
- **Symbol Mapping** [05:43] — Map TradingView symbol (EURUSD) to broker symbol (EURUSDi) in VexBinder to ensure correct trade execution.
- **Webhook Setup** [06:07] — In TradingView alerts, set trigger to 'once per bar', enable webhook URL, paste the VexBinder webhook, and set message with action (buy/sell). Clone alert for sell direction.
- **Fully Automated Trading** [07:44] — Once set up, the system automatically enters trades on breakout candle close, sets stop-loss and take-profit, and requires no manual intervention.

### Conclusion

This tutorial provides a complete, practical guide to automating a breakout strategy, eliminating the need for manual monitoring and execution. The creator emphasizes the strategy's recent success and encourages viewers to replicate the setup for consistent, hands-off trading.

## Transcript

I like measure the overnight Tokyo range and then when we break out above that range, we enter a buy order. And for the last two months on my Telegram group, I've been sending out kind of like an almost daily trade setup. Last month,
all the trades added up to 10% profit and I think we're like 3 weeks into this one. I haven't added it up yet, but in this video, I'm going to show you exactly how I have it set up and I'm going to show you how to automate it.
So, this trade setup basically enters on your account every day automatically cuz with the time zone because I'm in Europe. You guys are elsewhere and you're probably not up at 7:00 a.m. or 6:00 a.m. like I am. So, let's get into
it. The first thing that you're going to want to do is get on EuroUSD on a 5minut button and you're going to type in consolidation breakout V3 and it's this one right here by NS TradeB. Now, you're
going to want to adjust the settings a little bit. the range preset. Do it to custom. I have mine with a 6-h hour block from 1:00 a.m. to 7:00 a.m. in my time zone. You're going to have to play with this to find out what's best for
different time zone. And then in the style, because it's super noisy with all of these lines, just untick the lines box. The stop-loss mode, I want you to do a range percentage and do 50% of the range. And then for the takerit, you're
going to set it at riskto-reward and have that set at two. Um, I'm thinking yes on use EMA filter. If it's above the EMA, it buys. If it's below, it sells. Then just click okay. And now it'll show you basically a fake position tool for
every single breakout that happened outside of this box on a 5minut time frame. Now you can either trade these manually once they print, adjust your stop-loss to whatever you see as structure or keep it as it is. But what
I want to do to free up my time because one of the biggest issues with this strategy is that the session that it should start at is 7:00 a.m. At 7 a.m. I leave my house to go take my kid to school. And so I'm like staring at my
phone in the corner of my eye while driving my kid to school. And it's one not safe, two, it's distracting as hell. And most times I'll miss an entry. I like 30 minutes away. So back and forth
an hour of my life. So, I won't be able to get a breakout until 8, and it usually happens before then. So, what you want to do is add an alert. Now, these settings you're going to change in just a second, but I want you to set up
two separate alerts. One for buy and one for sell. Now, usually when you set up these alerts, you can get a text message, you can get an email, just the built-in notifications from Trading View. But if you use this website called
Vexbinder, basically it takes an alert from Trading View, deciphers what it's saying, and then enters a trade on your MetaTrader platform automatically. So, I'm going to go set this up and screen record this while I do it. So, once
you're logged in, you're going to go to the setup wizard. And most automations need a VPS so that they run 24 hours. This one actually has it to where you don't need a VPS. It's just kind of like a virtual VPS. So, I'm going to use this
one that's recommended. MetaTrader 5. I'm in Europe. It gives you some instructions right here to log into your broker once the virtual terminal pops here that says open terminal. Enter the password that it gave you and then
search the broker that you're going to use. I'm using Ryzen because they literally offer the best spreads and commissions I've ever seen. So, I deposited $6,000 into this account. Change this to the 5m minute time frame.
I actually want to make sure that I have the symbols correct. majors eurousd. All right. Now, what you're going to want to do in this cloud VPS, it's already going communicates between trading view and your MT5. It's called Vexbinder MT5. And
onto your chart. And then here in the inputs, you're going to put your EA token from the Vexbinder website. With your plan, you're going to get five do it on five separate accounts. And you're going to put your license token
this ID number at the top of the screen here. Then just click connect and you'll see that it says active. Now what you want to do is go to your licenses. Click license one or whatever you have it on and you're going to change the
parameters for the trade entry. I want to do two lots and this is where you're going to put your stop-loss and your takerit. You can either do it in pips or a multiplier of ATR. I'm going to choose this one because that's the best way to
formulate a stop-loss. The ATR is the average true range of price at any given candle and it fluctuates. If there's more volatility, the ATR is going to be higher for that candle. On the indicator itself, you can actually change to the
stop- loss to an ATR multiplier or fixed pips and your takerit in fixed pips. So, if we do something like this, an ATR multiplier of three, fixed pips of 15, then we're just looking for 15 pips of the breakout, and then the stop loss is
pretty good so far. That's a winner. That's a winner. That's a winner. And that's a winner. So, going back to VEX Binder, stop loss is going to be three times ATR. And the takerit is going to be in pips and it's going to be 15 pips.
Now, I like this option right here because [clears throat] I'm a conspiracy theorist and I think that people hunt your stop-loss. So, a shadow stop basically hides your stop-loss from the broker and the automation will close it
out once price reaches your stop-loss. So I'm going to keep that on ATR period. because that's the chart that I'm trading. Now under symbol rules depending on what symbol it is on your broker chart. So like on trading view
it's eurousd but on my broker it's eurousdi. So here I'm going to type in eurousd and then my broker shows euro usdi
and then click apply to this license. And all of your settings are now set. All right. So now you're going to open up trading view. Click the alert button and then under conditions you're going to set the trigger to once per bar and
then in the notifications enable web hook URL and paste this. So I'm going to copy this. Paste that web hook URL. Click apply once per bar. Close
open-ended for a buy signal. And then for the message, keep the message for the message, keep the message simple. Copy this. Delete the default one. Paste this. Click apply and then create. And now you
should see it here in this little clock icon. And these are going to be your alerts that you have set. Now all you need to do is rightclick it and clone it. And then go to the settings and then set it to sell. So it'll also buy and
sell. And then in the message just change the action to sell. Then click apply. Make sure your web hook URL is there. Click save. And now both of them should be active, one for selling and one for buying. You
can also do that here in the settings by going buy or sell, but my way is just to do the work twice. Then click alert is saved and you're all set. You're now a fully automated trader. If you click the first link in the description,
there's actually a Black Friday sale going on right now. So you can get Vexbinder for 50% off, which is amazing. I love this time of year. I renew my trading view with Black Friday specials. I buy everything for my family on Black
Friday. And if I need a new fridge or dishwasher, it's Black Friday. Now, every single time we get a breakout candle on the 5minute time frame that's outside of this range, the stop loss, the takerit, and everything will be set
automatically. And I don't have to worry about instant execution. This will just literally execute the moment this candle closes. It'll immediately get into a position. And I don't have to open up my chart. I don't have to draw my position
tool. I don't have to do anything. I just let it enter the trade, stop loss and take profit. And as you guys saw over the last month and a half, the with this. This indicator I found on Trading View. It almost does exactly
what I want it to and I don't have to do it manually. So hopefully now instead of you watching my Telegram, making sure that you're up at the right time to take the trade and then transition to MetaTrader and enter the trade. Now you
can set it up where all of it just happens automatically. Every day I'm going to post whether it's a win or a loss on my Telegram so you guys can keep that I am. Again, this is trading. This breakout strategy has been stellar for
it's going to continue going, but if it does, awesome. It's one of the easiest strategies that you can trade either manually or now automatically. Hopefully you guys enjoyed this tutorial. I hope it wasn't too boring. I just set this up
in like 15 16 minutes, so hopefully you can do it faster. Anyway, I look forward to seeing your results in the comments section.
