---
title: 'Windows Are Absurd'
source: 'https://youtube.com/watch?v=JsRiC6vGb1E'
video_id: 'JsRiC6vGb1E'
date: 2026-11-03
duration_sec: 1469
channel: 'Practical Engineering'
---

# Windows Are Absurd

> Source: [Windows Are Absurd](https://youtube.com/watch?v=JsRiC6vGb1E)

## Summary

This video explores the engineering and science behind windows, a seemingly simple building element that involves complex trade-offs between light, thermal efficiency, safety, and security. Through hands-on demonstrations, the host illustrates how modern glazing technologies—from double-pane units to low-emissivity coatings—have evolved to mitigate the costs of windows while preserving their benefits.

### Key Points

- **Windows: A Trade-Off** [00:12] — Windows provide light and a view but come at costs: structural changes, ventilation, sound, cooling, heating, safety, and security. They are a technology of sorts, with ongoing progress to balance benefits and drawbacks.
- **Heat Flow and Windows** [01:35] — Heat moves through windows via conduction, convection, and radiation. A typical exterior wall has an R-value of 10-25, while a single pane of glass has an R-value of about 1, meaning heat flows 10-25 times faster through a single-pane window.
- **Double-Pane Windows** [05:32] — Modern windows use two or three panes with sealed air gaps, sometimes filled with argon or krypton to reduce conduction and convection. Double-pane windows can double to quadruple the insulative value of a single pane.
- **Radiation and Low-E Coatings** [07:36] — Glass is opaque to far-infrared but highly emissive, absorbing and reradiating heat. Low-emissivity (low-e) coatings turn glass into an IR mirror, and can be tuned for climate: reflecting near-IR in warm climates or letting it in for cold climates.
- **Bird-Safe Glass** [11:25] — Windows cause significant bird mortality. The McCormick Place Convention Center in Chicago saw ~1,000 bird deaths annually; after installing dot patterns, strikes dropped by 95%. Bird-safe glass uses patterns, sometimes UV-visible to birds but invisible to humans.
- **Curtain Walls and Glazing** [13:42] — Curtain walls are non-load-bearing exterior facades, hung like a coat. Glazing methods include captured glazing (sandwiched in frames) and structural silicone glazing, where sealant holds the glass. Structural silicone is far stronger than typical caulk, as demonstrated.
- **Glass Safety: Tempered and Laminated** [17:31] — Annealed glass breaks into dangerous shards. Tempered glass is heat-treated to be stronger and breaks into small, less harmful pieces, but cannot be cut or drilled. Laminated glass sandwiches a plastic interlayer, holding shards together and providing security; it's used in windshields and overhead applications.

## Transcript

Have you ever thought about windows? Like really&nbsp; considered the idea? If we hadn’t been exposed&nbsp;&nbsp; to them our entire lives, it might seem like&nbsp; kind of a bizarre concept. On the face of it,&nbsp;&nbsp;
windows are about light. But it’s more esoteric&nbsp; than that, especially now that we can make our&nbsp;&nbsp; own light. We want to be inside, but not all&nbsp; the way inside. So we put holes in the wall.&nbsp;&nbsp;
It’s a heck of a trade-off: you get light and&nbsp; a view of the outdoors, but it comes at a cost.&nbsp;&nbsp; Not just the cost of the glass itself, but&nbsp; also the structural changes they require&nbsp;&nbsp; and their effects on ventilation, sound, cooling,&nbsp; heating, safety, and security inside a building.
As simple as they seem, windows are a technology&nbsp; of sorts. And like a lot of building science,&nbsp;&nbsp; we’ve slowly been making progress, readjusting&nbsp; those tradeoffs and giving us the benefits without&nbsp;&nbsp; so many of the costs. I love to pick a relatively&nbsp; innocuous part of the built environment and&nbsp;&nbsp;
really take a close look. So, I’ve built a&nbsp; few demonstrations in the garage to show you&nbsp;&nbsp; how far the science of glazing has come. I’m&nbsp; Grady, and this is Practical Engineering.
Glass is not a good substitute for&nbsp; an exterior wall, in many respects.&nbsp;&nbsp; If you take some wall away and replace it with a&nbsp; window, you’re not trading like-for-like. For one,&nbsp;&nbsp; you never accidentally throw a baseball through&nbsp; a brick wall. But it’s especially true when&nbsp;&nbsp;
it comes to heat. And this is a pretty big deal&nbsp; because we collectively spend vast sums of money,&nbsp;&nbsp; resources, effort, and energy on maintaining a&nbsp; comfortable thermal climate inside our buildings.&nbsp;&nbsp;
Almost all the time, in almost all the&nbsp; places, the temperature outside of a&nbsp;&nbsp; building is different from the temperature we&nbsp; want it to be inside. But the laws of physics&nbsp;&nbsp; (also all the time in all the places) are&nbsp; constantly working to equalize those temperatures.
We usually categorize the flow of heat into three&nbsp; separate modes. Conduction is heat moving through&nbsp;&nbsp; solid objects, atoms or molecules that are&nbsp; tightly packed, transmitting energy to their&nbsp;&nbsp; neighbors directly by vibrating against each&nbsp; other. Convection is heat transfer via the&nbsp;&nbsp;
movement of a fluid like air or water. Radiation&nbsp; is heat transfer through electromagnetic waves.&nbsp;&nbsp; Since it is literally light, radiation doesn’t&nbsp; need a medium. All three play a role in the walls&nbsp;&nbsp;
of buildings. And of course, it works both ways:&nbsp; sometimes it’s too hot outside and you want to&nbsp;&nbsp; keep that heat out. Sometimes it’s too cold and&nbsp; you want to keep the heat in. Any movement of&nbsp;&nbsp; heat from inside to out or vice versa is a flow&nbsp; of power, just like we measure with electricity.&nbsp;&nbsp;
If you have 500 watts of heat flowing out of&nbsp; your house, you essentially need a 500 watt&nbsp;&nbsp; heater inside to make up for the loss and maintain&nbsp; a steady temperature. And just like voltage is a&nbsp;&nbsp;
difference in potential that drives electrical&nbsp; current, heat flow is driven by a difference&nbsp;&nbsp; in temperature. The bigger that difference, the&nbsp; greater the flow of heat through a given wall. Continuing the electrical metaphor, insulation is&nbsp; the generic term we use to describe materials that&nbsp;&nbsp;
resist the transmission of heat from one side&nbsp; to the other. It makes sense that we put it in&nbsp;&nbsp; our walls. In the US, we use R-value as a measure&nbsp; of this resistance. This is kind of a cursed unit&nbsp;&nbsp;
of measurement, so I’m going to gloss over the&nbsp; scientific definition. But, a typical exterior&nbsp;&nbsp; wall assembly will usually have an R value&nbsp; between 10 and 25, depending on climate and how&nbsp;&nbsp; new the building is. A simple pane of glass has&nbsp; an R value of about 1. Let me show that to you.
I built this box of foam insulation in my garage.&nbsp; Inside, I have a 25 watt ceramic heat emitter.&nbsp;&nbsp; I can close this up and wait for the temperature&nbsp; inside to stabilize. When that happens,&nbsp;&nbsp;
we can assume that the heat going into the&nbsp; box is the same as the heat flowing out. difference between the interior and exterior&nbsp; probes is about 43 degrees Fahrenheit,&nbsp;&nbsp;
I think that’s around 24 celsius. This is R-5&nbsp; foam, soif you do the math for a perfectly sealed&nbsp;&nbsp; box with these dimensions that should be right&nbsp; around 50 F, 28 C, um, so accounting for the&nbsp;&nbsp;
imperfections in my setup, like this, uh, terrible&nbsp; tape seal, that’s actually pretty close. Um, so&nbsp;&nbsp; now I’m going to swap this lid out with a&nbsp; pane of glass, and we’ll set this going again. the temperature inside the shop hasn’t really&nbsp; changed, but the temperature inside the box&nbsp;&nbsp;
has gone down a lot compared to the&nbsp; foam lid. The difference is about 22 F,&nbsp;&nbsp; which I think is around 13 C. So, just replacing&nbsp; one side of the box with glass instead of foam,&nbsp;&nbsp;
it takes a much smaller difference in temperature&nbsp; to move that same 25 watts out of the box. I’m sure you see the issue here. If we want&nbsp; windows in our buildings, it comes at a cost&nbsp;&nbsp;
of thermal efficiency. For every square foot or&nbsp; square meter of exterior wall that we swap with&nbsp;&nbsp; single pane windows, heat will move through&nbsp; that space roughly 10 to 25 times faster.&nbsp;&nbsp;
So, we rarely use single-pane glazing&nbsp; anymore. Almost all modern windows use two,&nbsp;&nbsp; and sometimes even three panes of glass with&nbsp; a sealed air gap between them. Sometimes&nbsp;&nbsp;
this gap is filled with a heavy gas like argon or&nbsp; krypton that has lower conduction and convection.&nbsp;&nbsp; There are even vacuum insulated panels that have&nbsp; no air inside, eliminating convection entirely.&nbsp;&nbsp;
I happen to have a double-pane glass&nbsp; unit, so we can try the experiment again. difference is right at 30 F, 17 C. Remember with&nbsp; the foam lid it was about 43 degrees and with the&nbsp;&nbsp;
single pane it was around 23 degrees. So this&nbsp; is basically right in the middle. It’s not as&nbsp;&nbsp; good as when there was no window, but it’s&nbsp; a lot better than the single pane of glass.&nbsp; This varies a lot with details of the&nbsp; frame and coatings. But very generally,&nbsp;&nbsp;
modern double-pane windows can double to quadruple&nbsp; the insulative value of a single pane of glass,&nbsp;&nbsp; This idea of a sealed air gap between panes&nbsp; comes with one problem. If you’ve ever brought&nbsp;&nbsp;
a bag of chips on an airplane, you know what I’m&nbsp; talking about. If the glass manufacturer is at&nbsp;&nbsp; a low elevation and the window’s going&nbsp; to be installed somewhere much higher,&nbsp;&nbsp; you end up with an overpressure situation between&nbsp; the panes compared to the barometric pressure.&nbsp;&nbsp;
That can cause them to bow out and even&nbsp; fracture. In some cases, manufacturers&nbsp;&nbsp; will actually dial in the pressure for&nbsp; the altitude of the final destination.&nbsp;&nbsp; Another option is to install a capillary tube&nbsp; that equalizes the pressure inside and out.&nbsp;&nbsp;
These are very narrow diameter and long&nbsp; tubes meant to reduce the amount of moisture&nbsp;&nbsp; that diffuses between the panes, which would&nbsp; otherwise lead to condensation inside the unit. Insulating glass panels help reduce heat&nbsp; conduction and convection, but that’s not&nbsp;&nbsp;
the only way heat gets into and out of a building.&nbsp; The whole point of a window is to let in light,&nbsp;&nbsp; and we already learned that heat can move as&nbsp; electromagnetic waves. Of course, if we block&nbsp;&nbsp;
visible light through a window to avoid heat&nbsp; transfer, that kind of defeats the purpose. But&nbsp;&nbsp; radiation also happens at other wavelengths on the&nbsp; electromagnetic spectrum. Specifically, for the&nbsp;&nbsp; temperatures we deal with on a day-to-day basis,&nbsp; most of the thermal radiation happens in infrared:&nbsp;&nbsp;
wavelengths longer than visible light but shorter&nbsp; than microwaves. Even within that range, there are&nbsp;&nbsp; big differences in how the waves interact with&nbsp; matter. That’s particularly true for windows.
Typical stuff at ambient temperatures&nbsp; like a sun-baked driveway or human body,&nbsp;&nbsp; emit thermal radiation mostly in the far-infrared&nbsp; spectrum. This is the stuff you can see on a&nbsp;&nbsp; normal infrared camera. And even though glass&nbsp; is designed to let visible light through,&nbsp;&nbsp;
it is almost completely opaque to longwave&nbsp; infrared light. Try looking through a window&nbsp;&nbsp; with an infrared camera and you just see&nbsp; the window itself, not anything beyond.
It’s cool to think that if our eyes worked a bit&nbsp; differently - if they were tuned to a slightly&nbsp;&nbsp; different part of the electromagnetic spectrum&nbsp; - a glass window would be entirely useless.&nbsp;&nbsp; And it seems like it would be a&nbsp; good thing for our thermal problem,&nbsp;&nbsp;
preventing heat from transferring through.&nbsp; Unfortunately it’s not that simple. Glass isn’t just opaque to far-IR; it’s also&nbsp; highly emissive. That means it mostly absorbs&nbsp;&nbsp; thermal radiation rather than reflecting it.&nbsp; So, the radiation doesn’t come directly through,&nbsp;&nbsp;
but it does warm the glass, which can then&nbsp; just conduct through the pane and reradiate&nbsp;&nbsp; it where you don’t want it to go, whether inside&nbsp; or out. It’s basically radiation with extra steps. On the shorter wavelength part of the spectrum&nbsp; we call near IR, it’s a little different.&nbsp;&nbsp;
The main source of near IR radiation is the&nbsp; sun, and like visible light, that radiation&nbsp;&nbsp; can pass directly through most glass. This is&nbsp; how greenhouses work. The shortwave radiation&nbsp;&nbsp;
passes right through where it can warm the stuff&nbsp; inside. But the stuff inside radiates longwave IR,&nbsp;&nbsp; which can’t pass back out through the glass.&nbsp; So, windows are kind of a two-way half-door for&nbsp;&nbsp; far infrared (since they absorb and reradiate&nbsp; it in both directions) and a one-way door for&nbsp;&nbsp;
near infrared, but we can do better than that,&nbsp; mostly through low-emissivity or low-e coatings. These coatings essentially convert a pane of&nbsp; glass into a mirror for IR. And you can see&nbsp;&nbsp;
the difference really well with an IR camera. You&nbsp; still get some reflections with an uncoated pane,&nbsp;&nbsp; but the difference is obvious when you&nbsp; put a coated pane next to an uncoated one.&nbsp;&nbsp; But this gets a little tricky, especially when it&nbsp; comes to near IR. If you live in a cold climate&nbsp;&nbsp;
and your main use of energy is heating, you’re&nbsp; happy to invite as much sunlight as you can get&nbsp;&nbsp; inside. You don’t want to reflect the near IR. The&nbsp; opposite is true in warm climates. Fortunately,&nbsp;&nbsp;
manufacturers can tune the coatings according to&nbsp; the climate. You can reflect shortwave radiation&nbsp;&nbsp; if you’re worried most about cooling, or you&nbsp; can let it in to gather more heat inside.&nbsp;&nbsp;
Window manufacturers also sometimes vary which&nbsp; face is coated. In warmer climates, you can coat&nbsp;&nbsp; the inside of the outer pane, called “surface&nbsp; 2,” reflecting the IR before it crosses the gap&nbsp;&nbsp;
to keep it from warming the air between the panes.&nbsp; In cooler climates, you can put it on “surface 3”&nbsp;&nbsp; to reflect the long-waveshort-wave IR back into&nbsp; your house without it having to cross the air gap.&nbsp; Making windows more thermally efficient isn’t the&nbsp; only use for glass coatings. If you’re like me,&nbsp;&nbsp;
there’s a good chance you have the Merlin app&nbsp; installed on your phone. I think it’s a bit of&nbsp;&nbsp; an inevitability that once you reach a certain&nbsp; age, you start getting interested in birds.&nbsp;&nbsp; Unfortunately, one of the largest human-caused&nbsp; sources of bird mortality is actually windows.&nbsp;&nbsp;
At certain angles, windows work essentially&nbsp; like mirrors, reflecting the trees and sky,&nbsp;&nbsp; and birds (bless their hearts)&nbsp; can’t always tell the difference.&nbsp;&nbsp; It can happen the other way too. Sometimes&nbsp; a bird will see something inside a building&nbsp;&nbsp;
or all the way through two windows that they want&nbsp; to fly toward, not recognizing that there’s solid&nbsp;&nbsp; glass in the way. For you and me, walking into a&nbsp; glass pane like a sliding door is embarrassing,&nbsp;&nbsp; but for a bird flying at much higher speeds&nbsp; with tiny, hollow bones, it is often fatal.
McCormick Place Convention Center on the lakeshore&nbsp; in Chicago may be the most famous case study.&nbsp;&nbsp; In an average year, monitors would find around&nbsp; 1,000 dead birds around the building from&nbsp;&nbsp; collisions with the windows. In October 2023,&nbsp; nearly 1,000 birds died in a single night.&nbsp;&nbsp;
The owner finally decided to address the problem&nbsp; head on, installing a pattern of dots on all the&nbsp;&nbsp; glass surrounding the building. The solution&nbsp; cut the number of bird strikes by 95 percent.
Awareness about bird safe glass is continuing&nbsp; to grow, and so are the number of solutions.&nbsp;&nbsp; Many glass manufacturers have bird-safe&nbsp; products that work in a similar way.&nbsp;&nbsp; The goal is to break the illusion of glass being&nbsp; a mirror or imperceptible as a solid surface,&nbsp;&nbsp;
so most of the fixes involve patterns or designs&nbsp; on the glass. I think it looks pretty cool,&nbsp;&nbsp; actually. And because many bird species&nbsp; can see into the ultraviolet spectrum,&nbsp;&nbsp; you can even get dots and patterns that&nbsp; are practically invisible to humans,&nbsp;&nbsp;
but still perceptible to birds to keep them&nbsp; from crashing into windows. Some cities&nbsp;&nbsp; are already including requirements for bird&nbsp; safe glass into codes, particularly in major&nbsp;&nbsp; migration corridors and for buildings that&nbsp; use large, uninterrupted facades of glass.
This is a really common design for tall buildings&nbsp; and skyscrapers. Ever since I was a kid,&nbsp;&nbsp; I have always been impressed with this kind of&nbsp; facade. From the outside, it looks like a sleek,&nbsp;&nbsp; continuous column of glass. And it’s pretty&nbsp; interesting how it’s actually done. These&nbsp;&nbsp;
are called walls, specifically curtain walls. But&nbsp; they’re also not walls in the traditional sense,&nbsp;&nbsp; at least when it comes to bearing loads. We&nbsp; typically think of a building’s exterior walls&nbsp;&nbsp; as the primary load path - the way forces from the&nbsp; building are transferred to the foundation. With&nbsp;&nbsp;
curtain walls, that’s not true, and that name kind&nbsp; of gives it away. In buildings with curtain walls,&nbsp;&nbsp; the load bearing happens through interior&nbsp; columns. The exterior walls just hang there.&nbsp;&nbsp; Not that this needs another analogy, but it’s&nbsp; pretty much like the building is wearing a coat.
This has a lot of advantages. A curtain wall&nbsp; is relatively lightweight, reducing structural&nbsp;&nbsp; loads on a building. It’s also thin, maximizing&nbsp; space in a building where it comes at a premium.&nbsp;&nbsp; They’re also unitized: you get very&nbsp; large pieces assembled in a factory&nbsp;&nbsp;
so they go up quickly on a construction site.&nbsp; And, of course, you get a lot of light into&nbsp;&nbsp; the building when the entire exterior wall is a&nbsp; window. But how do you hold the glass in place? The process of installing glass, called glazing,&nbsp; is not like installing most other materials.&nbsp;&nbsp;
You can’t use traditional fasteners&nbsp; like nails or screws. Glass is brittle,&nbsp;&nbsp; and the sharp point forces would induce too much&nbsp; stress. If you look at the windows of your house,&nbsp;&nbsp; the glass panes are usually sandwiched inside&nbsp; a frame with softer material that both seals&nbsp;&nbsp;
against the glass to keep out the weather&nbsp; and spreads out the holding forces across&nbsp;&nbsp; a larger area along the edges of the glass.&nbsp; That’s sometimes called captured glazing.&nbsp;&nbsp; It’s done on large buildings with expansive&nbsp; glass facades too, but it’s not the only way.
When you really want the outside of a&nbsp; building to look like only glass with&nbsp;&nbsp; no mullions or framing elements&nbsp; protruding beyond the panes,&nbsp;&nbsp; you can use structural silicone glazing,&nbsp; where the sealant does some or all the work&nbsp;&nbsp;
to hold the glass in place. In 4-sided&nbsp; structural glazing, the glass panels are&nbsp;&nbsp; adhesively bonded on all four edges. You have&nbsp; nothing on the exterior except smooth glass.
If you’re used to the silicone sealants sold at&nbsp; the hardware store, this might seem absolutely&nbsp;&nbsp; crazy to you. I definitely wouldn’t trust a&nbsp; tube of bathroom caulk to hold thousands of&nbsp;&nbsp; pounds of glass hundreds of feet in the air&nbsp; above sidewalks and roads full of people.&nbsp;&nbsp;
To be fair, these systems do usually have&nbsp; some kind of mechanical clips or toggles that&nbsp;&nbsp; surreptitiously prevent panes from coming&nbsp; entirely loose if the sealant fails, but also,&nbsp;&nbsp;
structural silicone is very different from caulk. Just to demonstrate this, I have a glass&nbsp; block. First I’m going to attach this to&nbsp;&nbsp; a metal plate using typical silicone&nbsp; caulk you might use in the bathroom.
probably a bit ambitious. but it held 45 lbs for just about a minute&nbsp; before it dropped. And part of that’s cause,&nbsp;&nbsp;
even after 2 weeks of curing, you can&nbsp; see, only the caulk around the edges&nbsp;&nbsp; actually cured. This stuff is just not&nbsp; designed for heavy weights like this. This stuff comes from a few manufacturers&nbsp; in a variety of strengths, curing systems,&nbsp;&nbsp;
and material compatibilities. After I let&nbsp; this cure for a week, which is when the&nbsp;&nbsp; manufacturer says it reaches 50 percent of&nbsp; its strength, I tried my little demo again. It’s&nbsp;holding 45 pounds just fine.
So I added this small&nbsp; metal anvil just for good measure,&nbsp;&nbsp; Just a silly little experiment like this can&nbsp; give you a lot more confidence that those big&nbsp;&nbsp; insulated glass units on tall buildings aren’t&nbsp; going anywhere. But the engineering of windows&nbsp;&nbsp;
doesn’t stop at holding them in place. We also&nbsp; have to think about what happens if they break. The most typical glass we think about with picture&nbsp; frames and windows is actually annealed glass. The&nbsp;&nbsp;
manufacturing process is pretty impressive. The&nbsp; molten material is allowed to spread out and float&nbsp;&nbsp; atop a bed of molten tin, making it extremely flat&nbsp; and very consistent in thickness. Then the glass&nbsp;&nbsp;
is allowed to cool slowly, which relieves internal&nbsp; stresses. That makes it possible to cut along&nbsp;&nbsp; clean lines and even drill holes in the material.&nbsp; But it also means that when annealed glass breaks,&nbsp;&nbsp;
it usually fractures into large, razor-sharp&nbsp; shards that can be extremely dangerous.&nbsp;&nbsp; I think most people have enough experience with&nbsp; the issue that there’s hardly a need at all to&nbsp;&nbsp;
say that broken glass is a serious hazard. And&nbsp; in many cases, it’s a simply unacceptable hazard:&nbsp;&nbsp; a slip in the shower that breaks the&nbsp; door, a toddler on a glass tabletop,&nbsp;&nbsp; even pushing too hard on a glass door. There are&nbsp; plenty of documented cases where a simple accident&nbsp;&nbsp;
became fatal simply because of how annealed glass&nbsp; becomes jagged and razor-sharp when it fractures. One of the main solutions to the problem is&nbsp; tempering the glass. If you heat glass and&nbsp;&nbsp;
cool it down quickly, often using a high-pressure&nbsp; blast of air, you can get the outside to cool a&nbsp;&nbsp; little quicker than the inside of the glass. The&nbsp; outside faces shrink. Then when the inside cools,&nbsp;&nbsp;
it shrinks as well, pulling the outside&nbsp; faces of the glass into compression.&nbsp;&nbsp; If you use a polarizing filter, sometimes you&nbsp; can even see the stresses in tempered glass.&nbsp;&nbsp; This is a tricky process because if the cooling&nbsp; happens unevenly, the glass will crack or break.&nbsp;&nbsp;
I’ve discovered this myself by accidentally&nbsp; setting a glass dish on the stove burner.&nbsp;&nbsp; But if you do it right, tempering glass makes&nbsp; it much stronger than typical annealed glass.&nbsp;&nbsp; Since the outer faces are in compression,&nbsp; cracks are less able to propagate.
But even if it does break,&nbsp; tempered glass has a big advantage.&nbsp;&nbsp; Instead of the large shards, you tiny, relatively&nbsp; harmless pieces. These can still have sharp edges,&nbsp;&nbsp; but just being so much smaller means they’re much&nbsp; less able to injure someone. They have a lot less&nbsp;&nbsp;
mass when they fall, and the edges are shorter, so&nbsp; it’s more like angry gravel and less like deadly&nbsp;&nbsp; knives and spears. That’s why tempered glass is&nbsp; often called safety glass, and lots of building&nbsp;&nbsp;
codes require it in situations where broken&nbsp; glass can pose a safety hazard like glass doors,&nbsp;&nbsp; large windows close to the ground, and in&nbsp; bathrooms and showers. Most vehicles also&nbsp;&nbsp;
use tempered glass on the side windows to&nbsp; reduce the risk of injury during a crash. One disadvantage of tempered glass is&nbsp; that it can’t be modified after the fact.&nbsp;&nbsp; All that built-up stress in the material&nbsp; makes sure it shatters into tiny pieces,&nbsp;&nbsp;
but it also prevents you from&nbsp; cutting or drilling holes.&nbsp;&nbsp; Tempering has to be the final step. The other&nbsp; disadvantage also comes from its main advantage.&nbsp;&nbsp; Because tempered glass breaks in a relatively&nbsp; safe way, it doesn’t offer much security. And&nbsp;&nbsp;
really it’s true for annealed glass too. Windows&nbsp; aren’t just a thermal weak point in buildings;&nbsp;&nbsp; they are also a security weak point. Why&nbsp; would a criminal struggle to break through&nbsp;&nbsp; a reinforced door if they can just quickly smash&nbsp; a window? That’s where laminated glass comes in.
You can glue individual panes of glass together&nbsp; where they still retain almost perfect optical&nbsp;&nbsp; clarity. But even better than that, you can&nbsp; sandwich a tough plastic interlayer between those&nbsp;&nbsp; panes of glass, creating a composite material.&nbsp; And it behaves a lot differently when it breaks.&nbsp;&nbsp;
Now you don’t have shards separating&nbsp; at all. Even completely cracked apart,&nbsp;&nbsp; the glass stays adhered to the plastic&nbsp; instead of flying apart. And more importantly,&nbsp;&nbsp; this is still a barrier even after it breaks.&nbsp; I’m not getting my hand through there.&nbsp;&nbsp;
Laminated glass is ideal for overhead&nbsp; applications, where a break could otherwise rain&nbsp;&nbsp; down shards on people below. And it’s perfect for&nbsp; commercial buildings, especially on ground floors,&nbsp;&nbsp;
to make it more challenging for someone to&nbsp; break in through a window or glass door.&nbsp;&nbsp; Laminated glass is also standard on vehicle&nbsp; windshields to offer more protection from a&nbsp;&nbsp; road hazard that could otherwise break through&nbsp; the glass and injure the driver or passengers.
What’s kind of crazy is that I’m just scratching&nbsp; the surface of modern window technology, not to&nbsp;&nbsp; mention the glass itself, which can get a lot more&nbsp; complicated for applications like phone screens.&nbsp;&nbsp;
But these are all innovations that are kind&nbsp; of hiding in plain sight, and to me at least,&nbsp;&nbsp; they make the view through a&nbsp; window just a little bit sweeter. A lot of people ask me what I do with all these&nbsp; demonstrations after I finish shooting a video.&nbsp;&nbsp;
The answer is that a lot of the parts get reused&nbsp; in the future. That steel plate with the tapped&nbsp;&nbsp; hole I used to demo structural silicone was&nbsp; originally used in my video about guyed antenna&nbsp;&nbsp;
towers. I am always mocking up demonstrations like&nbsp; this, and it’s rare that I can just pick something&nbsp;&nbsp; off the shelf. Most of my builds have custom,&nbsp; one-off parts to make them work, even simple&nbsp;&nbsp; stuff like this. That’s why I rely on my friends&nbsp; at Send Cut Send, the sponsor of today’s video.&nbsp;
You can watch a lot of my videos and see this&nbsp; process in action. Send Cut Send can fabricate&nbsp;&nbsp; practically anything I can dream up in CAD&nbsp; that uses sheet materials like steel, aluminum,&nbsp;&nbsp; or acrylic. They have a huge catalog of materials,&nbsp; and it’s not just laser cutting. They can bend,&nbsp;&nbsp;
countersink, tap, and even insert hardware.&nbsp; They’ve also started offering CNC machining.&nbsp;&nbsp; which makes rapid prototyping a dream,&nbsp; especially with the instant quotes.
It’s hard to convey how much of a superpower it&nbsp; is to have a service like this to go from idea to&nbsp;&nbsp; model to part so quickly. And you don’t even need&nbsp; to know CAD, because they have a bunch of useful&nbsp;&nbsp;
and customizable templates. I can’t recommend Send&nbsp; Cut Send enough. They are an essential part of my&nbsp;&nbsp; workflow in the shop. If you have projects that&nbsp; could use some fabrication help, the link below&nbsp;&nbsp; is going to give you a discount on your first&nbsp; order. I really appreciate their support, and&nbsp;&nbsp;
I hope you give them a try. Thank you for&nbsp; watching, and let me know what you think.
