---
title: 'STOP Bench Pressing Like This (I''M BEGGING YOU!)'
source: 'https://youtube.com/watch?v=j_5du-KhOu4'
video_id: 'j_5du-KhOu4'
date: 2026-10-26
duration_sec: 218
channel: 'ATHLEAN-X™'
---

# STOP Bench Pressing Like This (I'M BEGGING YOU!)

> Source: [STOP Bench Pressing Like This (I'M BEGGING YOU!)](https://youtube.com/watch?v=j_5du-KhOu4)

## Summary

The video demonstrates a subtle grip adjustment for the dumbbell bench press — shifting the hold toward the thumb-side and tilting the wrist — that reduces wrist compression and improves pressing efficiency. It explains the anatomical reason (the radius is longer than the ulna) and offers a corresponding tip for barbell pressing. The technique aims to maximize strength while minimizing wrist pain.

### Key Points

- **Wrist Position Comparison** [00:01] — Demonstrates two wrist positions during dumbbell bench press and asks which one the viewer uses. Emphasizes the wrist position changes where the force transmits at the wrist.
- **Grip Adjustment** [00:27] — Instruction: grip the dumbbell slightly toward the thumb-side end and focus the squeeze through the fingers. This tilts the thumb side of the hand higher.
- **Anatomy: Radius and Ulna** [01:09] — Explains that the radius bone is longer than the ulna, causing compression on the radial side of the wrist when pressing. This misalignment can cause wrist pain.
- **Optimal Wrist Position** [01:52] — Solution: tilt the thumb up slightly to create a small gap in the wrist joint, improving biomechanical alignment and reducing compression.
- **Barbell Application** [02:07] — For barbell presses, use a grip slightly narrower than your natural width to offload radial-side strain. Wider grips increase compression.

## Transcript

athletext.com. How are you benching right now? Do you look like this when you perform a dumbbell bench press or do you look like this? back to the first clip. Look at the wrist. Do you look like this when you do
wrist. Do you look like this when you do it or do you look like this? See, the wrist position is entirely different. But what the wrist position does is it changes what's happening at the end of your wrist and more importantly setting
become more efficient and stronger in that press. Now, why is that? Well, we're going to do in this grip here. Instead of gripping it traditionally right down the middle of the dumbbell, I want to shift my grip just a little bit
to the end. And then I want to focus my squeeze through these two fingers. Now, I'm wrapping it over that forefinger, but this is not a hook grip, guys. We're as hard as I can through those at the thumb side end of the dumbbell. These
it does, you can see, is it just starts to position this side of the hand a to position this side of the hand a little bit higher than this side. Okay? important? We break out Raymond here, at least part of Raymond to show you why
that's important. You can see if my wrist was this way that the radius the bone on the top side of the forearm here is longer at the end than the ulna is. And that's by design of our bodies here. We have a longer radius than an ulna. So
in my hand, right, and I put the weight in the hand like this, it can cause compression at that portion of the wrist where the radius meets the wrist itself. have wrist pain, that's going to feel very uncomfortable for people. The wrist
of the weight that you can press there. But more importantly, what it's doing is actually taking this wrist out of biomechanical alignment. Because believe it or not, the best way to do this is to get a little bit of that gapping here by
letting the thumb tilt up just a little bit. And again, the carpal bones will through the radius and the ulna, but it's better mechanically aligned because we don't get that compression. Now, how would this apply to a barbell? If I got
down on a bench here, obviously I'm restricted to what I could do because my hands are fixed on a barbell and they're not on a dumbbell. But there is one yourself a little bit better shot of feeling less pain through your wrist and
you'd want to go a little bit narrower on your grip rather than wider. So to talking about very clearly, if I took a really really wide grip, the wider I go, the more compression I get at the radial side of the wrist, right? You can see
that the wider I go, the more compression I get. So, if I wanted to get off of that radial side, I'd want to go more narrow. And you can see as I go more and more and more and more narrow, I actually have very little compression
on that radial side. So, I'm not suggesting you close grip bench press press. What I'm suggesting is you find the typical width that's good for you on a bench press and then just go a little narrower than that to help offload some
of that strain and compression on that radial side. Fact is, guys, if you try dumbbells and do this. It's going to work on whether or not you're using more or whether you start to tap into those heavier weights, you're going to
promise you guys, give it a shot. It will work. In the meantime, if you found it works for you, make sure you leave your comment below. If you're looking back in strength, always you can head to athletics.com. And finally, guys, if you
subscribe and turn your notifications so you never miss a new video when we put you never miss a new video when we put one out. All right, guys. See you soon.
