[0:00] How to connect your Phone to VSeeFace through the VTube Studio app!
[0:04] Here's what you'll need: your Phone, a computer or laptop, the mobile version of VTube Studio,
[0:08] a stable internet connection, VSeeFace, and of course a Vroid model.
[0:13] Before we begin, keep in mind that for this tutorial, this feature doesn't require the premium version of VTube Studio.
[0:19] And yes, this works for both iPhone and Android, however tracking will vary on your device.
[0:25] At this moment, there is only a wireless method. Back to the tutorial.
[0:28] For this video we’ll be doing this on iPhone, but android users, these steps will still apply to you!
[0:35] You'll first want to open up the VTube Studio app then click on the gear icon.
[0:40] From there, scroll down until you see the section “Third Party PC Clients”. And then enable it.
[0:47] Once you do that, either swipe to the notifications tab on your phone and click on the wifi icon,
[0:52] or go into your phone settings and scroll till you see your wifi settings.
[0:58] From there, click on the internet that you're connected to and look for the numbers that are on the IP Address section.
[1:04] This number is very important.
[1:06] I won’t be showing mine for privacy reasons...
[1:11] From there, we wanna open up VSeeFace on our computer or laptop. Import and select the model you'll be using.
[1:20] Once your model is loaded in, select the "General Settings" button & scroll down until you see iPhone/ARKit tracking receiver.
[1:29] Enable it. Select "VTube Studio" in 'Tracking App', then click "Show IP"  and type in the IP Address that was on your Phone.
[1:37] Back to our phone, make sure to go into the VTube Studio app,
[1:40] then make sure your camera is calibrated in VTube Studio by pressing the camera icon.
[1:45] Double click it again to remove the camera window.
[1:50] And your model should be tracking properly now. (Phone must be awake)
[1:53] Make sure to set your phone in a spot where you have good lighting and the camera can see your face clearly for best results.
[2:00] And have fun with your model!