---
title: 'Connect your Phone to VSeeFace with VTube Studio! | VTuber Tutorial'
source: 'https://youtube.com/watch?v=MJA1IWUsAaE'
video_id: 'MJA1IWUsAaE'
date: 2026-06-15
duration_sec: 145
---

# Connect your Phone to VSeeFace with VTube Studio! | VTuber Tutorial

> Source: [Connect your Phone to VSeeFace with VTube Studio! | VTuber Tutorial](https://youtube.com/watch?v=MJA1IWUsAaE)

## Summary

This tutorial explains how to connect your phone to VSeeFace using the VTube Studio app for wireless face tracking. It covers the necessary equipment, setup steps for both iPhone and Android, and tips for optimal tracking.

### Key Points

- **Introduction and Requirements** [0:00] — You need a phone, computer, VTube Studio app, stable internet, VSeeFace, and a Vroid model. No premium version required.
- **Enable Third Party PC Clients in VTube Studio** [0:35] — Open VTube Studio, tap gear icon, scroll to 'Third Party PC Clients' and enable it.
- **Find Phone's IP Address** [0:47] — Go to Wi-Fi settings on your phone, tap the connected network, and note the IP address.
- **Configure VSeeFace** [1:11] — Open VSeeFace, load your model, go to General Settings, enable iPhone/ARKit tracking receiver, select 'VTube Studio' as tracking app, click 'Show IP', and enter your phone's IP address.
- **Calibrate Camera in VTube Studio** [1:37] — In VTube Studio, tap the camera icon to calibrate, then double-tap to remove the camera window. Ensure phone is awake and placed with good lighting.

### Conclusion

By following these steps, you can wirelessly use your phone's face tracking to control a VTuber model in VSeeFace via VTube Studio.

## Transcript

How to connect your Phone to VSeeFace through the VTube Studio app!
Here's what you'll need: your Phone, a computer or laptop, the mobile version of VTube Studio,
a stable internet connection, VSeeFace, and of course a Vroid model.
Before we begin, keep in mind that for this tutorial, this feature doesn't require the premium version of VTube Studio.
And yes, this works for both iPhone and Android, however tracking will vary on your device.
At this moment, there is only a wireless method. Back to the tutorial.
For this video we’ll be doing this on iPhone, but android users, these steps will still apply to you!
You'll first want to open up the VTube Studio app then click on the gear icon.
From there, scroll down until you see the section “Third Party PC Clients”. And then enable it.
Once you do that, either swipe to the notifications tab on your phone and click on the wifi icon,
or go into your phone settings and scroll till you see your wifi settings.
From there, click on the internet that you're connected to and look for the numbers that are on the IP Address section.
This number is very important.
I won’t be showing mine for privacy reasons...
From there, we wanna open up VSeeFace on our computer or laptop. Import and select the model you'll be using.
Once your model is loaded in, select the "General Settings" button & scroll down until you see iPhone/ARKit tracking receiver.
Enable it. Select "VTube Studio" in 'Tracking App', then click "Show IP"  and type in the IP Address that was on your Phone.
Back to our phone, make sure to go into the VTube Studio app,
then make sure your camera is calibrated in VTube Studio by pressing the camera icon.
Double click it again to remove the camera window.
And your model should be tracking properly now. (Phone must be awake)
Make sure to set your phone in a spot where you have good lighting and the camera can see your face clearly for best results.
And have fun with your model!