Connect Phone to VSeeFace with VTube Studio!
45sThe video immediately addresses a common desire among VTubers to use phone tracking, promising a free method.
▶ Play ClipAI Summary
This tutorial explains how to connect your phone to VSeeFace using the VTube Studio app for wireless face tracking. It covers the necessary equipment, setup steps for both iPhone and Android, and tips for optimal tracking.
Chapters
[0:00]
Introduction and Requirements
You need a phone, computer, VTube Studio app, stable internet, VSeeFace, and a Vroid model. No premium version required.
[0:35]
Enable Third Party PC Clients in VTube Studio
Open VTube Studio, tap gear icon, scroll to 'Third Party PC Clients' and enable it.
[0:47]
Find Phone's IP Address
Go to Wi-Fi settings on your phone, tap the connected network, and note the IP address.
[1:11]
Configure VSeeFace
Open VSeeFace, load your model, go to General Settings, enable iPhone/ARKit tracking receiver, select 'VTube Studio' as tracking app, click 'Show IP', and enter your phone's IP address.
[1:37]
Calibrate Camera in VTube Studio
In VTube Studio, tap the camera icon to calibrate, then double-tap to remove the camera window. Ensure phone is awake and placed with good lighting.
By following these steps, you can wirelessly use your phone's face tracking to control a VTuber model in VSeeFace via VTube Studio.
Clickbait Check
95% Legit"Title accurately describes the tutorial; it delivers exactly what it promises."
Mentioned in this Video
Tutorial Checklist
3
1:11
Open VSeeFace on computer, load model, go to General Settings, enable iPhone/ARKit tracking receiver, select 'VTube Studio', click 'Show IP', enter phone's IP.
Study Flashcards (5)
What app is used on the phone for face tracking?
easy
Click to reveal answer
What app is used on the phone for face tracking?
easy
Click to reveal answer
VTube Studio
What setting must be enabled in VTube Studio to connect to PC?
easy
Click to reveal answer
What setting must be enabled in VTube Studio to connect to PC?
easy
Click to reveal answer
Third Party PC Clients
0:40
What information from the phone is needed to connect to VSeeFace?
medium
Click to reveal answer
What information from the phone is needed to connect to VSeeFace?
medium
Click to reveal answer
The IP address from Wi-Fi settings.
0:58
In VSeeFace, which tracking app should be selected?
medium
Click to reveal answer
In VSeeFace, which tracking app should be selected?
medium
Click to reveal answer
VTube Studio
1:29
Does this method require the premium version of VTube Studio?
easy
Click to reveal answer
Does this method require the premium version of VTube Studio?
easy
Click to reveal answer
No, it works with the free version.
0:13
💡 Key Takeaways
📊
No Premium Required
Clarifies that the feature is accessible without paying.
0:13
📊
Wireless Only
Important limitation: no wired option available.
0:25
🔧
IP Address Importance
Critical step for connection; must be entered correctly.
1:04
🔧
Lighting and Positioning
Practical tip for optimal tracking performance.
1:53Full Transcript
[00:00] How to connect your Phone to VSeeFace through the VTube Studio app!
[00:04] Here's what you'll need: your Phone, a computer or laptop, the mobile version of VTube Studio,
[00:08] a stable internet connection, VSeeFace, and of course a Vroid model.
[00:13] Before we begin, keep in mind that for this tutorial, this feature doesn't require the premium version of VTube Studio.
[00:19] And yes, this works for both iPhone and Android, however tracking will vary on your device.
[00:25] At this moment, there is only a wireless method. Back to the tutorial.
[00:28] For this video we’ll be doing this on iPhone, but android users, these steps will still apply to you!
[00:35] You'll first want to open up the VTube Studio app then click on the gear icon.
[00:40] From there, scroll down until you see the section “Third Party PC Clients”. And then enable it.
[00:47] Once you do that, either swipe to the notifications tab on your phone and click on the wifi icon,
[00:52] or go into your phone settings and scroll till you see your wifi settings.
[00:58] From there, click on the internet that you're connected to and look for the numbers that are on the IP Address section.
[01:04] This number is very important.
[01:06] I won’t be showing mine for privacy reasons...
[01:11] From there, we wanna open up VSeeFace on our computer or laptop. Import and select the model you'll be using.
[01:20] Once your model is loaded in, select the "General Settings" button & scroll down until you see iPhone/ARKit tracking receiver.
[01:29] Enable it. Select "VTube Studio" in 'Tracking App', then click "Show IP" and type in the IP Address that was on your Phone.
[01:37] Back to our phone, make sure to go into the VTube Studio app,
[01:40] then make sure your camera is calibrated in VTube Studio by pressing the camera icon.
[01:45] Double click it again to remove the camera window.
[01:50] And your model should be tracking properly now. (Phone must be awake)
[01:53] Make sure to set your phone in a spot where you have good lighting and the camera can see your face clearly for best results.
[02:00] And have fun with your model!